Skip to content
Fotomory

Coming to the App Store

How do you scan film negatives with an iPhone?

Put the negative on an even backlight, such as a tablet showing a white screen, photograph it with the iPhone held parallel, then invert the picture. Color negatives also need their orange mask removed, which a plain inversion does not do. FilmBox by Photomyne does both on the phone; a film scanner gets more detail.

What you need

How to photograph a negative with an iPhone

  1. Clean the film. Blow the dust off both sides. Hold the strip by its edges and never wipe it.
  2. Lift it off the light. Put the card and the film a little above the screen, on a sheet of tracing paper or a small box, so the screen’s pixels blur instead of showing through.
  3. Darken the room. Any lamp in the room reflects on the film and lowers the contrast.
  4. Hold the iPhone parallel to the film. Turn on the level in Settings > Camera. On iPhone models with macro photography, the Camera app switches to macro by itself when you come close, as close as 2 centimeters.
  5. Set the exposure. Tap the frame to focus, then drag down next to the focus box until no part of the picture is pure white. A frame that is too bright loses detail that no editing brings back.
  6. One frame per photo. A whole strip in one shot is useful as an index, but each frame gets far fewer pixels.

Why color negatives look orange

Color negative film has an orange tint, the orange mask, built in to improve the colors of prints made from it. A lab print is balanced for it; a phone photo of the negative is not. If you only invert the colors, that orange turns into a strong blue cast over the whole picture.

The fix is to treat the bare film between two frames as neutral. In an editor with a white balance picker, pick that bare film first, so its orange turns gray, then invert the picture with the curves tool by dragging the two ends of the curve to the opposite corners. Fine-tune the colors afterwards. Black-and-white negatives have no orange mask: inverting them is enough.

Is there an app to scan photo negatives?

Yes. FilmBox by Photomyne is made for it: you open a white backlight on a computer, hold the strip in front of it, and the app inverts the colors and enhances the picture automatically. Its App Store page says: “The first few photos are free.” (checked ). For more, it lists these plans: Free, with in-app purchases: Unlimited (Monthly) $7.99, $9.99; Unlimited (Yearly) $39.99, $29.99; Unlimited scanning (2 years) $29.99, $49.99, $39.99; FilmBox membership $19.99 (checked ).

The main Photomyne app scans negatives too, along with prints and slides. SlideScan by Photomyne is the same idea as FilmBox for slides, not negatives: see how to convert slides to digital.

Can I scan 35mm film using my phone?

Yes. A 35mm frame is 24 × 36 mm, so the challenge is getting close enough to fill the iPhone’s frame while keeping it sharp. On models with macro photography the camera focuses as close as 2 centimeters; on other models, back off until the picture is sharp and crop afterwards. The result is fine for sharing and for small prints. For enlargements, a film scanner gets more detail out of each frame.

When is a scanner or a service better?

A dedicated film scanner, or a flatbed scanner with a light in its lid for film, gets more detail out of a negative than a phone photo, and film scanning software inverts color negatives for you. Mail-in services take negatives too: HeritageBox lists negatives among its formats, Legacybox takes them in its mixed box, and ScanMyPhotos has its own 35mm negative scanning. Check each service’s page for what negatives cost. The same services’ prices for prints are compared in scan photos yourself or use a service.

Walgreens Photo’s Home Movie & Print Digitization page also says photo prints, negatives and slides can be transferred to a USB drive (checked November 15, 2026).

What are we building?

For prints, see how to scan photos with an iPhone. For negatives, we are building an app that will invert color negatives with their orange mask in mind, cut a whole strip of film into frames and keep every photo on the iPhone: Fotomory, our iPhone app – not on the App Store yet.

Step by step

  1. 1

    Make a backlight

    Show a plain white screen at full brightness on a tablet, a second phone or a laptop, or use a lightbox. On the device you use as a light, turn off Night Shift and True Tone.

  2. 2

    Hold the film flat

    Put the strip in a film holder, or between a black card with a window cut for one frame and a clean sheet of glass. Touch the film only by its edges.

  3. 3

    Photograph one frame at a time in a dark room

    Turn off the room lights, hold the iPhone parallel to the film and close enough that one frame fills the screen, tap to focus, and drag down next to the focus box until no part of the picture is pure white.

  4. 4

    Remove the orange mask

    For color negatives, set the white balance on the bare film between two frames, so its orange turns neutral gray.

  5. 5

    Invert the colors

    Turn the negative into a positive in an app made for negatives, or in an editor with a curves tool by dragging the two ends of the curve to the opposite corners.

Scan the whole page at once

Photograph an album page once and you will get every photo on it cut out, with who, when and where kept alongside. That will be the job of Fotomory, our iPhone app – not on the App Store yet.

Coming to the App Store

Questions and answers

Is there an app to scan photo negatives?

Yes. FilmBox by Photomyne is made for negatives: you hold the film in front of a backlight and it inverts the colors automatically. The main Photomyne app scans negatives too. Any camera app can photograph a negative, but then you have to invert it and remove the orange mask yourself.

Can I scan 35mm film using my phone?

Yes. Put the film on an even backlight, such as a tablet showing a white screen, and photograph one frame at a time with the iPhone held parallel and close. A 35mm frame is only 24 × 36 mm, so come as close as the camera can focus. The result is fine for sharing and small prints; a film scanner gets more detail for enlargements.

Why do color negatives look orange?

Color negative film has an orange mask built in, which improves the colors of prints made from it. Inverting the colors alone turns that orange into a strong blue cast, so it has to be balanced out too. Black-and-white negatives have no orange mask: inverting them is enough.

Can I use a laptop or tablet screen as a light source?

Yes. A laptop or tablet showing a plain white screen at full brightness works, and FilmBox suggests a computer screen too. Lift the film a little off the screen, so the screen's pixels blur instead of showing up in the photo.

Related pages